Position: Home > Products > Pulsed Fiber Laser > Nanosecond Pulsed Fiber Laser > 1.0um Nanosecond Pulsed Fiber Laser > 1064nm Pulsed Laser Source Module
The 1064nm pulsed laser source module of Connet is specially designed for pulse application. It is an ideal seed laser for pulsed fiber laser. This laser source module internally employs the high-performance diode laser which is especially designed for pulse application. The laser is modulated directly to pulse laser by the pulse circuit with the optimized design. The ns level, MHz pulse output can be achieved with the peak power up to 1W.
The 1064nm pulsed laser source of Connet adopts the module package with the compact structure and tiny volume with 12V DC supply, industrial standard RS232 control interface and built-in signal generator. The user can control the source module and operate it easily through the upper computer software. The pulse output can be also achieved by the external TTL trigger signal, which is very suitable for system integration.
Specifications:
Parameter |
Unit |
Specification |
||
Min |
Typ. |
Max |
||
Part no. |
|
VLSS-1064-M-PL |
||
Operating wavelength |
nm |
1032 |
1064 |
1080 |
Spectral width (FWHM) |
nm |
- |
- |
1 |
Peak power1 |
mW |
- |
- |
1000 |
Pulse rise and fall time |
ns |
- |
2 |
- |
Pulse width |
ns |
1 |
- |
1000 |
Repetition rate |
kHz |
- |
- |
1000 |
Side-mode Suppression Ratio (SMSR) |
dB |
20 |
- |
- |
Output power stability (15mins)2 |
% |
- |
±0.5 |
±1.0 |
Output power stability (8hrs)2 |
% |
- |
±1.0 |
±2.0 |
Output power adjustable range |
% |
0 |
- |
100 |
Output power adjustable mode |
|
Coarse / Fine |
||
Operating voltage |
VDC |
12 |
||
Power consumption3 |
W |
- |
- |
30 |
Operating temperature |
℃ |
0 |
- |
50 |
Storage temperature |
℃ |
-40 |
- |
85 |
Output fiber type |
|
SM fiber (PM optional) |
||
Output fiber length |
m |
> 1 |
||
Optical connector |
|
FC/APC (other options available) |
||
Dimension |
mm |
150(L)x125(W)x25(H) |
Specifications:
· The higher peak power is available.
· The output power stability is measured under 25℃ after 30 minutes' warm-up.
· The max power consumption is tested under the extreme conditions.
Ordering Information:
· VLSS-1064-M-PL-XX-YY-ZZ
· M: Module
· PL: Pulse mode
· XX: Pulse width in ns;YY-Repetition rate in kHz;ZZ-Peak power in W
Features:
· Operating wavelength: 1032-1080nm
· Peak power: up to1W
· Short pulse operation 1ns-1us
· Output isolation
· High stability and reliability
Applications:
· Seed laser for pulsed fiber laser
· Test and measurement
· Optical fiber sensing
· Spectrum analysis
· Other lab applications