Products
Position：
Home >
Products >
Pulsed Fiber Amplifier >
Nano-second Pulsed Fiber Amplifier >
1.0um ns Pulsed Fiber Amplifier >
1.0um High Power Pulsed Fiber Amplifier
The MARS series 1.0um high power pulsed fiber amplifiers of Connet are specially designed for short pulse (<50ns) amplification. These amplifiers employ the optimized double cladding fiber amplification technology. Therefore, it can guarantee the maximum optical-optical conversion efficiency and the minimum nonlinear effects and meanwhile avoid the spectral broadening of the pulse signal during the process of amplifying. The output peak power is up to 50kW.
The unique thermal treatment technology guarantees that the amplifiers can be operated stably for a long time. The high-speed response protection circuit monitors the power of the input and the output signals automatically to ensure the safety of the whole system.
The MARS series high-power pulsed fiber amplifiers include the single-mode and the polarization-maintaining outputs. Different types of packages are available for option such as benchtop, rack-mount and module. This series of amplifiers can be widely used in the areas of optical fiber sensing, coherent combination and laser processing, etc.
Specifications:
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
MFAS-Yb-10xx-PL：SM MFAP-Yb-10xx-PL：PM |
||
|
Wavelength range1 |
nm |
1040 |
1064 |
1083 |
|
Average power |
W |
- |
5 |
- |
|
Peak power |
kW |
- |
- |
50 |
|
Pulse width |
ns |
1 |
- |
50 |
|
Repetition rate |
kHz |
10 |
- |
500 |
|
Operation mode |
|
Pulse |
||
|
Output power tunable range |
% |
10 |
- |
100 |
|
Polarization |
|
Random or Linear Polarization |
||
|
Polarization Extinction Ratio (PER) |
dB |
15 |
20 |
- |
|
Output power stability2 (8hrs) |
% |
- |
±1 |
±2 |
|
Beam quality |
M2 |
<1.2 |
||
|
Input isolation |
dB |
30 |
- |
- |
|
Output isolation |
dB |
30 |
- |
- |
|
Output fiber type (SM) |
|
SM or LMA fiber |
||
|
Output fiber type (PM) |
|
PM Fiber |
||
|
Output fiber length |
m |
>1 |
||
|
Optical connector |
|
FC/APC (other options available) |
||
|
Power supply |
VAC |
100-240 |
||
|
Operating temperature |
℃ |
0 |
- |
+30 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Cooling mode |
|
Air-cooling |
||
|
Dimension |
|
19”2U or 19”3U
|
||
Specifications:
· Typical operating wavelength: 1053nm, 1064nm, 1083nm
· The output power stability is measured under 25℃ after 30 minutes' warm-up.
Ordering Information:
· MFAS-Yb-10xx-<P>-PL：SM
· MFAP-Yb-10xx-<P>-PL：PM
· 10xx: Operating wavelength in nm
· P: Package: B-Benchtop, R-Rack-mount, M-Module
Features:
· High peak output: up to 50kW
· High stability, high reliability
· Output power tunable
· Customized versions available
Applications:
· Fiber Optic Sensing
· LiDAR & LADAR
· Biological and Medical
· Laser Processing
· Research & Development
Language
