Products
Position：
Home >
Products >
Broadband Light Source >
SLD/SLED Broadband Light Source >
SLED Broadband Light Source >
SLD Broadband Light Source
The VENUS series high-power SLD (SLED) light source of Connet is a high-stability source designed for scientific research and industrial production with the high-power, broadband SLD (SLED) module being installed internally Aiming at special characteristics of SLD (SLED) laser, the SLD (SLED) light source of Connet employs the specialized protective measurement on circuit design and optical path processing in order to protect the laser from the reflected light and the surge of current or voltage, thus ensuring that the light source can be operated safely and stably in a long time.
The VENUS series SLD (SLED) source of Connet covers different intervals within the scope of 800~1650nm and the typical wavelengths include 840nm, 980nm, 1060nm, 1310nm and 1550nm,etc. There are plenty of choices for output power and spectral width. In addition, our company also can offer the low polarization ratio SLD source to satisfy the demands for different applications according to the requirements of the user.
Specifications:
|
Parameter |
Unit |
Specification |
||
|
Min |
Typ. |
Max |
||
|
Part no. |
|
VSLS-XXXX-B |
||
|
Center wavelength |
nm |
840nm、980nm、1060nm、1310nm、1550nm |
||
|
Output power2 |
mW |
>1.5 |
||
|
Spectral width (FWHM)3 |
nm |
>20 |
||
|
Spectral modulation |
dB |
<0.45 |
||
|
Output isolation4 |
dB |
30 |
||
|
Output power Stability (15mins)5 |
% |
<1 |
||
|
Output power Stability (8h)5 |
% |
<3 |
||
|
Output power tunable mode |
|
Coarse / Fine |
||
|
Output fiber type |
|
Single-mode Fiber (PM optional） |
||
|
Output fiber length |
m |
> 1 |
||
|
Optical connector |
|
FC/APC (other options available) |
||
|
Operating voltage |
VAC |
100-240 |
||
|
Power consumption |
W |
- |
- |
5 |
|
Operating temperature |
℃ |
0 |
- |
+50 |
|
Storage temperature |
℃ |
-40 |
- |
+85 |
|
Dimension |
mm |
340(L)×240(W)×100(H) |
||
Specifications:
· Center wavelength is optional；
· Output power is optional, depend on wavelength；
· Spectrum width is optional, depend on wavelength；
· Output isolation is related to wavelength；
· The output power stability is measured under 25℃，after 30 minutes' warm-up；
Ordering Information:
· VSLS-XXXX-P-<PW>
· XXXX: Center wavelength in nm
· P: Package, B-Benchtop, M- Module
· PW: Output power in mW. Example: 20-20mW, 100-100mW
Features:
· High power and wide spectrum
· Multiple safety protection
· High stability and high reliability
· LCD display
· High precision ATC and ACC control circuit
Applications:
· Test and measurement
· Optical fiber sensor system
· Fiber optic gyroscope
· Spectrum analysis
· Other lab applications
Language
