Products
Professional Fiber Laser Solutions Provider
welcome to connet
Products

Products

Position: Home > Products > CW Fiber Laser > 1.0um CW Fiber Laser > Broadband 1.0um CW Fiber Laser > 1.0um Single-mode CW Fiber Laser (20-100W)

1.0um Single-mode CW Fiber Laser (20-100W)

The 1.0um single-mode CW fiber laser of Connet is a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ the integrated design of all-fiber structure and use double cladding fiber pumping technology to realize the high-performance output laser. The output power can be up to 100W and the near diffraction-limited beam quality can be achieved at the same time. The lasers can be widely used in the areas of scientific research, experimental teaching and device testing.

Connet 1.0um single-mode CW fiber laser employs the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer the warning messages. Besides, the modular package is also available upon request for the convenience of system integration.


Specifications:

Parameter

Unit

Specification

Min

Typ.

Max

Part no.

 

VFLS-1064-B-HP

Center wavelength

nm

-

1064

-

Output power1 

W

20

-

100

Output power adjustable range

%

10

-

100

Spectral width (FWHM)2 

nm

-

-

1

Side-mode Suppression Ratio (SMSR)

dB

35

-

-

Beam quality

M2

<1.3

Operation mode

 

CW

Polarization

 

Random (Linear Polarization Optional)

Output power stability (15mins)3

%

-

±0.5

±1.0

Output power stability (8hrs)3

%

-

±1

±2

Output isolation

dB

35

-

-

Return loss

dB

40

-

-

Operating temperature

0

-

30

Storage temperature

-40

-

85

Operating voltage

VAC

100

-

240

Output fiber type 4

 

LMA Fiber 

Output fiber length

m

> 1

Optical connector

 

FC/APC or Collimator (other optional)

Dimension

mm

510x480x150


Specifications:

· Output power is optional with the typical output power of 20W, 50W and 100W, etc. 

· Spectral width on request.

· The output power stability is measured under 25℃ after 30 minutes'  warm-up.

· Polarization-maintaining fiber is optional.


Ordering Information:

· VFLS-1064-B-HP-<PW>-<SP>

· B: Benchtop

· PW: Output power in W, 20-20W, 100-100W

· SP:Output isolation , 1-Yes,0-None

Features:

· High output power: up to 100W

· Excellent beam quality

· Highly stable and reliable performance

· Single-mode output, PM optional

Applications:

· Test and measurement

· Scientific research

· Spectroscopy analysis

· Other lab applications